Connecting Monitored Doors

This section describes how to connect monitored doors.

Operating modes 2 to 9 support door status indication in 5 Series Manager.

Proceed as follows.

  1. When deploying the installation, for example by applying the quick guide for operating modes 2 to 9, connect the door monitoring contact (for example, a door contact or microswitch locking box) to the Door Module.
  2. Connect the door contact – or any other potential-free output – to input IN2 or IN3 and COM. IN2 and IN3 are separate inputs, and the outputs connected to them can be displayed separately in the Monitored Doors view.
  3. Add the monitored door to iLOQ 5 Series Manager. See Adding Monitored Doors.