Adding Monitored Doors
This section describes how to define an input, to which the door contact is connected, as a monitored door.
Proceed as follows.
-
Select
.
- Select the network module, which has the Door Modules, with DOOR STATUS connections, connected.
-
Right-click to select Edit relay settings.
The Edit network module relay information window is opened.
- Select the Inputs tab.
- Select the In use check box for the input that you want to define as a monitored door.
-
Enter a Door name for the input.
This is the name that will be shown in the Monitored doors grid view.
- Select Save and close.