Administration Guide
Administering the iLOQ 5 Series locking system
- Installations
- Logging In to iLOQ Locking System
- User Interface
- Common Administration Tasks
- Dashboard
- Front Page
- Locks
- Keys
- Persons
- Blocklist
  This section provides an introduction to the blocklist.
- Floor Plans
- Programming Key Content
- Access Rights
- Time Profiles
- Person Roles
  This section provides an introduction to person roles.
- Reporting
- Programming keys
- Network Module
- Working with Key programming Hot Spots
- Users
- Browsing the Locking System Event Log
  This section describes how to browse the locking system event log on iLOQ 5 Series Manager.
- Estates
  This section provides an introduction to estates.
- Zones
  This section provides an introduction to zones.
- Editing Locking System Information
- Batch Operations
- Help Functions
- Calendar Controlled Doors
  - Browsing Calendar Controlled Doors
    This section describes how to browse calendar controlled doors on iLOQ 5 Series Manager.
  - Viewing Calendar Controlled Door Properties
    This section describes how to view the properties of a calendar controlled door on iLOQ 5 Series Manager.
  - Adding Calendar Controlled Doors
    This section describes how to define a relay, connected to control an electric lock, as a calendar controlled door, on iLOQ 5 Series Manager software.
  - Adding Control Calendars for Doors
    This section describes how to add a door control calendar on iLOQ 5 Series Manager.
  - Adding Key PIN-code Calendars
    This section describes how to add a key PIN-code calendar on iLOQ 5 Series Manager.
  - Adding Direct Controls to Calendars
    This section describes how to add a direct control to a calendar on iLOQ 5 Series Manager.
  - Adding Code-access Groups
    This section describes how to add a code-access group on iLOQ 5 Series Manager.
  - Setting up a Code-access Group
    This section describes how to set up a code-access group on iLOQ 5 Series Manager.
  - Adding Code-access Group Controls to Calendars
    This section describes how to add a code-access group control to a calendar on iLOQ 5 Series Manager.
  - Connecting Calendars to Calendar Controlled Doors
    This section describes how to attach calendars to calendar controlled doors on iLOQ 5 Series Manager.
  - Connecting Key PIN Code Calendars to Locks
    This section describes how to attach a key PIN-code calendar to locks on iLOQ 5 Series Manager.
- Monitored Doors

Calendar Controlled Doors

Calendar controls are used to control electric locks on doors with iLOQ Door Modules.

If all the door locks must be open at the same times, you can control them by using one calendar only. In other words, you do not have to create a separate calendar for each door.

If a door needs to have different open times, you can create a separate calendar for this door. A door can also be controlled by several calendars.

The calendar types are:

Door control calendar — A door control calendar can only be attached to a calendar controlled door. A door control calendar can contain two types of control types:
- Direct control — The door is controlled to be open or closed at different times.
- Code access group control — You can define the times in the calendar, when the door can be opened by using a code. At the defined times, the door can be opened by entering an access code on the keypad. This code is only valid on the times defined in the calendar.
  
  Code access groups are meant to allow door access to people, such as visitors, who do not and will not have a key.
One calendar can have several controls of both control types.
Key PIN-code time calendar — A key PIN-code time calendar can only be attached to locks. In the key PIN-code time calendar, you define the times when the lock requires key holders to enter a PIN-code on the keypad, in addition to using a key.

This calendar feature must be separately activated, before it can be used.