Adding Calendar Controlled Doors
This section describes how to define a relay, connected to control an electric lock, as a calendar controlled door, on iLOQ 5 Series Manager software.
Proceed as follows.
-
Select
.
- Select the network module, which has the relays connected.
-
Right-click to select Edit relay settings.
The Edit network module relay information window is opened.
- Select the Relays tab.
- Check the Calendar controllable check box for the relays that you want to define as a calendar controlled door.
-
Enter a Door name for the relay.
This is the name that will be shown in the Calendar controlled doors grid view.
- Select Save and close.