Home
Administration Guide
Administering the iLOQ 5 Series locking system
Locks
Programming Locks
Programming S5 Locks through the Programming Key
This section describes how to program S5 locks through the Programming key memory at the site.

Administration Guide
Administering the iLOQ 5 Series locking system
- Installations
- Logging In to iLOQ Locking System
- User Interface
- Common Administration Tasks
- Dashboard
- Front Page
- Locks
  - Browsing Locks
    This section describes how to view lock information on iLOQ 5 Series Manager.
  - Viewing the Lock Properties
    This section describes how to view the properties of locks in iLOQ 5 Series Manager.
  - Adding Locks
  - Editing the Lock Access Rights
    This section describes how to edit lock access rights and time limitations on iLOQ 5 Series Manager.
  - Editing the Lock Time Profiles
    This section describes how to edit lock time profiles on iLOQ 5 Series Manager.
  - Editing the Lock Settings
    This section describes how to edit lock settings on iLOQ 5 Series Manager.
  - Ordering Locks
    This section describes how to order locks, which are in the In planning state, on iLOQ 5 Series Manager.
  - Programming Locks
    - Programming Locks
      This section describes how to program locks on iLOQ 5 Series Manager.
    - Using the Programming State Functionality
    - Programming S5 Locks through the Programming Key
      This section describes how to program S5 locks through the Programming key memory at the site.
  - Resetting Locks
  - Lock Audit Trails
  - Fetching the Lock Software Version
    This section describes how to fetch the lock software version to iLOQ Manager.
  - Hidden Locks
  - Deleting Locks
    This section describes how to delete locks from iLOQ Locking System.
- Keys
- Persons
- Blocklist
  This section provides an introduction to the blocklist.
- Floor Plans
- Programming Key Content
- Access Rights
- Time Profiles
- Person Roles
  This section provides an introduction to person roles.
- Reporting
- Programming keys
- Network Module
- Working with Key programming Hot Spots
- Users
- Browsing the Locking System Event Log
  This section describes how to browse the locking system event log on iLOQ 5 Series Manager.
- Estates
  This section provides an introduction to estates.
- Zones
  This section provides an introduction to zones.
- Editing Locking System Information
- Batch Operations
- Help Functions
- Calendar Controlled Doors
- Monitored Doors

Programming S5 Locks through the Programming Key

This section describes how to program S5 locks through the Programming key memory at the site.

Proceed as follows.

Transfer one or more lock programming tasks to the Programming key.
See Managing Programming Key Content.
You can logout from iLOQ 5 Series Manager, if you want.
Unplug the Programming key from the computer.
Go to the site with the Programming key.
Connect the lock programming cable to the Programming key.
Connect the lock to be programmed to the Programming key by inserting the lock programming cable into the lock.

Wait until the green status led on the Programming key is illuminated.
Remove the lock programming cable from the lock.
If necessary, repeat steps 6-7 until the desired locks have been programmed.
Connect the Programming key back to the computer.
Login to iLOQ 5 Series Manager.
Soon, a reply message is displayed in the lower right corner of iLOQ 5 Series Manager.

When the reply message is received, the executed programming tasks are automatically removed from the Programming key memory. Refresh the iLOQ 5 Series Manager lock grid view and see from the Programming status column that the required locks are programmed.