Administration Guide
Administering the iLOQ 5 Series locking system
- Installations
- Logging In to iLOQ Locking System
- User Interface
- Common Administration Tasks
- Dashboard
- Front Page
- Locks
  - Browsing Locks
    This section describes how to view lock information on iLOQ 5 Series Manager.
  - Viewing the Lock Properties
    This section describes how to view the properties of locks in iLOQ 5 Series Manager.
  - Adding Locks
  - Editing the Lock Access Rights
    This section describes how to edit lock access rights and time limitations on iLOQ 5 Series Manager.
  - Editing the Lock Time Profiles
    This section describes how to edit lock time profiles on iLOQ 5 Series Manager.
  - Editing the Lock Settings
    This section describes how to edit lock settings on iLOQ 5 Series Manager.
  - Ordering Locks
    This section describes how to order locks, which are in the In planning state, on iLOQ 5 Series Manager.
  - Programming Locks
    - Programming Locks
      This section describes how to program locks on iLOQ 5 Series Manager.
    - Using the Programming State Functionality
    - Programming S5 Locks through the Programming Key
      This section describes how to program S5 locks through the Programming key memory at the site.
  - Resetting Locks
  - Lock Audit Trails
  - Fetching the Lock Software Version
    This section describes how to fetch the lock software version to iLOQ Manager.
  - Hidden Locks
  - Deleting Locks
    This section describes how to delete locks from iLOQ Locking System.
- Keys
- Persons
- Blocklist
  This section provides an introduction to the blocklist.
- Floor Plans
- Programming Key Content
- Access Rights
- Time Profiles
- Person Roles
  This section provides an introduction to person roles.
- Reporting
- Programming keys
- Network Module
- Working with Key programming Hot Spots
- Users
- Browsing the Locking System Event Log
  This section describes how to browse the locking system event log on iLOQ 5 Series Manager.
- Estates
  This section provides an introduction to estates.
- Zones
  This section provides an introduction to zones.
- Editing Locking System Information
- Batch Operations
- Help Functions
- Calendar Controlled Doors
- Monitored Doors

Programming Locks

There are three lock programming scenarios:

You can program one or more locks immediately at hand, by using an online iLOQ 5 Series Manager and the Programming key. You can carry out this procedure for new locks in the factory state, or re-program already programmed locks.

If this is the case, see Programming Locks.
For re-programming S5 locks, you can transfer one or more offline programming tasks from iLOQ 5 Series Manager to the Programming key, unplug the Programming key from the computer, and program the locks at the site. You can carry out this procedure for an existing lock only. Once the programming task is performed, plug the Programming key to the computer with iLOQ 5 Series Manager opened and retrieve reply messages from the Programming key.

If this is the case, see Managing Programming Key Content.
You can remotely re-program S5 locks connected to a network module. You can carry out this procedure for an existing lock only.

If this is the case, see Ordering Locks.