Editing the Main Zone of the Key

This section describes how to edit the main zone of the key.

When the key is returned and emptied, the blocklist of the previous key's main zone will be erased from the key.

Once the key status is "in planning", the key's main zone can be edited.

Selecting a new main for the key and then programming the key, the key user will share the blocklist, based on the selected key's main zone.

Note:

Required fields are marked with an asterisk (*).

Proceed as follows.

  1. Select Basic data > Browse keys.

  2. Place the key or Key fob to be returned against the Programming Adapter, to its designated place.

    The key or Key fob placed to the Programmer Adapter will be highlighted by a blue background color in the iLOQ 5 Series Manager key grid view.

  3. Right-click the key or Key fob and select Return and empty key.
    The Return of keys wizard is opened.
  4. Select Return keys.
  5. Click Next.
  6. Select the Retain returned keys is the system check box.
  7. Click Next.
  8. A summary window is displayed.
  9. Select whether to print out a key or Key fob return document.

    The options are:

    • Do not print — Select this radio button to skip the printing option.
    • Print return document to each key — Select this radio button to print out a return document to each returned key or Key fob.
    • Print return document for keys by person — Select this radio button to print out a return document for keys by person.
  10. Click Close.
  11. If you selected an option to print out a return document, the return document is opened in a new tab.
  12. Now, you can change the key main zone by right-clicking to select Change key's main zone.

    The Edit key's main zone wizard is opened.

  13. Select Edit key's main zone.
  14. Select the new main zone for the key, from the Key's main zone drop-down menu.
  15. Click Next.
  16. Select how to proceed:

    • Leave key in planning state — Select Leave key in planning state if you want to leave the key in the planning state, and program the key later.

    • Order key — Select Order key if you want to create the programming task, but execute it later, or remotely program the key through a phone.

    • Order and program key — Select Order and program key if you want to create the programming task and execute it at once.

    • Order, program and handover key — Select Order, program and handover key if you want to create the programming task, execute it at once for a key at hand, and handover the key.

  17. Click Next.
  18. A summary window is displayed.
  19. Click Ready.