Viewing Network Module Properties
This describes how to view network module properties in iLOQ 5 Series Manager.
Proceed as follows.
-
Select
.
-
The network modules are displayed in a grid. For more information about an
individual network module, double-click the network module.
Network module specific information is displayed by tab:
- Basic information — The Basic information tab contains general information about the selected network module. For descriptions of the columns, see Browsing Network Modules.
- Locks — The Locks tab contains about the locks connected to the network module. For descriptions of the columns, see Browsing Locks.
-
Networked — The Networked tab contains the network data of the selected network module. Available fields:
- Network module — The name of the network module.
- IP and port — The network module’s public IP address and firewall port.
- MAC address — The MAC address of the network module.
- Report date — The date and time of the latest server query made by the network module.
- Programmer version — The software version of the internal programming device. The internal programming device is used to control network locks.
- Software version — The software version of the network module.
- Calendar updated — The date and time of the latest time the network module retrieved calendar data from the server.
-
Remote load station queue — The Remote load station queue tab contains information about the remote controlled station's task queue. Columns:
- Type — The type of the queued programming task.
- Name — The name of the key and the location of the lock.
- Status — The programming status of the lock or key.
- Target/Person — The locked item or the name of the person to whom the key is assigned.
- Floor plan — The floor plan of the task item’s location.
- Estate — The estate where the task item is located.
-
Calendars — The Calendars tab contains information about the relays connected to calendar control.
-
Devices — The Devices tab contains information about the bus devices connected to the network module.
- To exit, click Close.