This section describes how to add locks to iLOQ Locking System.
Note:
You do not necessarily need the actual physical locks to add locks in iLOQ
Locking System. You can define the locks and associate them with the physical
locks at a later phase.
Proceed as follows.
-
Select .
-
Select Add lock.
The Add lock wizard is opened.
-
Select Add lock.
-
Define the lock settings as follows:
-
Placement — Placement refers to the location of the lock on the floor plan.
If you are adding several locks at a time, set the first placement in a way that it ends
with a number, such as A1. In this way, the system adds consecutive placement
numbers as follows:
-
Approach direction — Approach direction refers to the direction where the
lock will be opened from, if the door is equipped with double side lock.
-
Locking target — Locking target provides a more detailed description or
name of the room or premises, where the lock will lead to.
If you are adding several locks at a time, set the first locking target in a way that
it ends with a number, such as Door 1. In this way, the system adds consecutive
locking targets as follows:
-
Lock cylinder — Lock cylinder refers to the lock cylinder type. Select the
type in the drop-down list, or enter the type manually.
-
Allow API access rights — Check Allow API access rights to allow
Application Programming Interface (API) access rights for the lock.
-
Online authentication required — Check the Online authentication
required, if you want to create a high-security lock that requires server
authentication each time the lock is opened.
Note:
Online authentication lengthens the lock opening time.
If you have allowed API access rights, and checked the Online authentication
required, select also one or both of the options below:
-
For API access rights — If you check this check box, the lock
requires online authentication from a key that has an API access right. If you do
not check this check box, the lock can opened without online authentication, by a
key that has an API access right.
-
For standard access rights — If you check this check box, the lock
requires online authentication from a key that has a standard access right. If you
do not check this check box, the lock can opened without online authentication, by a
key that has a standard access right.
-
Select Next.
-
Enter additional information as necessary.
The fields are:
-
Door type — Door type refers to the type of door where the lock will be
mounted on.
-
Escutcheon — Escutcheon refers to the shield plate that surrounds the
keyhole on the door.
-
Lock model — Lock model refers to the model of the lock case.
-
Cylinder extension — Cylinder extension refers to the extension that will
be added to the new lock.
-
Door thickness (mm) — Door thickness indicates the thickness of the door
where the lock will be mounted on.
-
Depth of lock body (mm) — Depth of lock body
(mm) indicates the depth of the lock case.
-
Opening direction — Opening direction
indicates the door opening direction.
-
Note — Note refers to additional
information on the lock or the door.
-
Select Next.
-
Select the access rights for the lock.
The default access right will be automatically added for the lock.
-
Select the desired access right in the list on the left.
-
You can manage the selection of access right with the key buttons as
follows:
-
— Click the Arrows
right button to move all items to the selection list.
-
— Click the Arrow
right button to move the selected item(s) to the selection list.
-
— Click the Arrow
left button to remove the selected item(s) from the selection list.
-
— Click the Arrows
left button to remove all items from the selection list.
-
If necessary, set the lock to handle time limits by checking the
Lock handles time limits check box.
Note:
If a key is time limited, but the lock does not handle key time limits,
the key functions all the time.
-
Select Next.
-
Select if you want to create an individual access right or not.
-
Select Next.
-
Select Next.
-
Select the time profiles:
-
Not time limited — If you select this option, the
lock ignores all time profiles on keys. In other words, the keys
function 24/7 even if they do have a time profile.
-
Apply all time profiles on a key — If you select
this option, the lock applies all time profiles on keys.
-
Apply selected time profiles — If you select this
option, the lock only applies the selected time profiles on keys. If the
selected time profiles do not match with the key time profiles, the key
functions all the time.
You can manage the selection of time profiles with the arrow buttons as
follows:
-
— Click the Arrows
right button to move all items to the selection list.
-
— Click the Arrow
right button to move the selected item(s) to the selection list.
-
— Click the Arrow
left button to remove the selected item(s) from the selection list.
-
— Click the Arrows
left button to remove all items from the selection list.
You can view the content of a time profile on the area to the right, by
selecting the profile with your mouse.
Regardless of your selection, the lock always applies the key validity start
and end dates and times.
-
Select the number of locks to create.
-
Select Next.
-
Select how to proceed.
The options are:
-
Leave locks in planning state — Select Leave locks
in planning state if you want to leave the locks in the planning
state, and continue planning the locking system without, for example, programming any
physical locks.
-
Order programming task — Select
Order programming task if you know
that the lock definitions are final, but you want to program the
lock later.
For more information, see Ordering Locks.
-
Order and program locks — Select
Order and program locks:
- If you know that the lock definitions are final, and you
want to program the lock at once.
- For locks that have not yet been installed on the
premises.
For more information, see Programming New Locks in the Lock View.
-
Select Next.
-
A summary screen is shown.
-
Follow the wizard to end the
procedure.
