Editing the Lock Access Rights

This section describes how to edit lock access rights and time limitations on iLOQ Manager.

1. Select Basic data > Browse locks.

   

2. Select the desired lock.
3. Right-click to select Edit access rights.
   The Edit access rights of the lock wizard is opened.
4. Select Edit access rights of the lock.
5. Select the access right(s) for the lock.
   • — Click the Arrows right button to move all items to the selection list.
   • — Click the Arrow right button to move the selected item(s) to the selection list.
   • — Click the Arrow left button to remove the selected item(s) from the selection list.
   • — Click the Arrows left button to remove all items from the selection list.
6. Select Next.
7. Select the time profiles:

   • Not time limited — If you select this option, the lock ignores all time profiles on keys. In other words, the keys function 24/7 even if they do have a time profile.

   • Apply all time profiles on a key — If you select this option, the lock applies all time profiles on keys.

   • Apply selected time profiles — If you select this option, the lock only applies the selected time profiles on keys. If the selected time profiles do not match with the key time profiles, the key functions all the time.

     You can manage the selection of time profiles with the arrow buttons as follows:

     • — Click the Arrows right button to move all items to the selection list.
     • — Click the Arrow right button to move the selected item(s) to the selection list.
     • — Click the Arrow left button to remove the selected item(s) from the selection list.
     • — Click the Arrows left button to remove all items from the selection list.

     You can view the content of a fixed time profile on the area to the right, by selecting the profile with your mouse. Editable time profile content is not shown, as it may be key-specifically modified.

   Regardless of your selection, the lock always applies the key validity start and end dates and times.

8. Select Next.
9. Select how to proceed.

   The options are:

   • Leave locks in planning state — Select Leave locks in planning state if you want to leave the locks in the planning state, and program the locks later.

   • Order and send — Select Order and send if you want to create the programming tasks and transfer them to default programming phones, and let the phones carry out the programming, when the phone is placed against the lock.

     If you select this option, the lock will enter the Ordered state. This means that the lock programming package has been sent to the default programming phone(s). The lock enters the Issued to programming state when the phone replies to the server that is has received the package. Finally, when the phone has visited the lock and programmed it, the lock enters the Programmed state.

     Note:

     The Browse locks view is not automatically refreshed, but you must press the Refresh button to refresh the view to see the changes in the lock programming state.

   • Order and program locks — Select Order and program locks if you want to create the programming task, and execute it at once over the Programming Token.

10. Select Next.
11. A summary screen is shown.
12. Follow the wizard to end the procedure.