Programming Locks

There are three lock programming scenarios:

• You can program one or more locks immediately at hand, by using an online iLOQ Manager and the Programmer. You can carry out this procedure for a new or an existing lock.

  If this is the case, see Programming Locks.

• You can transfer one or more offline programming tasks from iLOQ Manager to the Programmer, unplug the Programmer from the computer, and program the locks at the site. You can carry out this procedure for an existing lock only.

  If this is the case, see Managing Programmer Content.

• You can remotely program locks connected to a network module. You can carry out this procedure for an existing lock only.

  If this is the case, see Ordering Locks.