This section describes how to edit lock access rights and time limitations on iLOQ Manager.
Note:
Mandatory fields are marked with an asterisk (*).
Proceed as follows.
-
Select .
-
Select the desired lock.
-
Right-click to select Edit access rights.
The Edit access rights of the lock wizard is
opened.
-
Select Edit access rights of the lock.
-
Select the access right(s) for the lock.
-
— Click the Arrows
right button to move all items to the selection list.
-
— Click the Arrow
right button to move the selected item(s) to the selection list.
-
— Click the Arrow
left button to remove the selected item(s) from the selection list.
-
— Click the Arrows
left button to remove all items from the selection list.
-
Select Next.
-
If necessary, set the lock to handle time limits by checking the
Lock handles time limits check box.
Note:
If a key is time limited, but the lock does not handle key time limits,
the key functions all the time.
-
Select Next.
-
Select how to proceed.
The options are:
-
Leave locks in planning state — Select
Leave locks in planning state if you
want to leave the locks in the planning state, and program the locks
later.
-
Order locks — Select Order
locks if you want to create the programming
task, but execute it later, or program networked locks.
-
Order and program locks — Select
Order and program locks if you want
to create the programming task, and execute it at once for a single
lock at hand.
-
Order and transfer tasks to programmer —
Select Order and transfer tasks to
programmer if you want to create the programming
tasks, transfer them to the Programmer,
and take the Programmer with you to
program the locks at the site. If you have networked locks, this
option will also program them through the network.
-
Select Next.
-
A summary screen is shown.
-
Follow the wizard to end the
procedure.
