Adding an Access Right to Blacklist

This section describes how to add an access right to the blacklist on iLOQ Manager.

Warning:

Blacklisting an access right is an advanced feature that can have extensive effects on the system. Ask for more information from iLOQ before you blacklist an access right.

Proceed as follows.

  1. Select Basic data > Browse blacklist.

  2. Select Add to blacklist.
    The Add to blacklist wizard is opened.
  3. Select Add an access right to the blacklist.
  4. Select the access right that you want to add to the blacklist.
  5. Select Next.
  6. Select how to proceed with the locks affected.

    The options are:

    • Leave locks in planning state — Select Leave locks in planning state if you want to leave the locks in the planning state, and program the locks later.

    • Order locks — Select Order locks if you want to create the programming task, but execute it later, or program networked locks.

    • Order and program locks — Select Order and program locks if you want to create the programming task, and execute it at once for a single lock at hand.

    • Order and transfer tasks to programmer — Select Order and transfer tasks to programmer if you want to create the programming tasks, transfer them to the Programmer, and take the Programmer with you to program the locks at the site. If you have networked locks, this option will also program them through the network.

  7. Select Next.
  8. A summary screen is shown.
  9. Follow the wizard to end the procedure.