Editing Access Right Key Selections

This section describes how to edit the access right key selections on iLOQ 5 Series Manager.

Proceed as follows.

  1. Select Additional data > Browse access rights.

  2. Right-click the access right that you want to edit, and select Add / remove key.
    The Edit access right wizard is opened.
  3. Select Edit access right selections.
  4. Edit the key selections of the access right.
    1. You can manage the selection of keys with the arrow buttons as follows:
      • — Click the Arrows right button to move all items to the list.
      • — Click the Arrow right button to move the selected item(s) to the list.
      • — Click the Arrow left button to remove the selected item(s) from the list.
      • — Click the Arrows left button to remove all items from the list.
  5. Click Next.
  6. Select how to proceed.

    If you are adding access rights to S5 keys or S50 Key fobs, the options are:

    • Leave key in planning state — Select Leave key in planning state if you want to leave the key in the planning state, and program the key later.

    • Order key — Select Order key if you want to create the programming task, but execute it later, or remotely program the key through a phone.

    • Order and postpone programming on Hot Spot — Select Order and postpone programming on Hot Spot if you want to postpone the programming task until the key is used on the Key programming Hot Spot.

      Define also the time as of which the programming task is available on the Key programming Hot Spot.

      This option is only visible, if iLOQ Online system and Key programming Hot Spot functionality are enabled.

      This option cannot be used for new keys, only for key changes.

    • Order and program key — Select Order and program key if you want to create the programming task and execute it at once.

    • Order, program and handover key — Select Order, program and handover key if you want to create the programming task, execute it at once for a key at hand, and handover the key.

    If you are adding access rights to S50 Phone keys, the options are:

    • Leave keys in planning state — Select Leave keys in planning state if you want to leave the key in the planning state, and program the key later.

    • Send keys — Select Send keys if you want to send the programming task to the phone.

  7. Click Next.
  8. A summary window is displayed.
  9. Follow the wizard to end the procedure.