Editing the Access Right Lock Selections

This section describes how to edit the access right lock selections on iLOQ Manager.

1. Select Additional data > Browse access rights.

   

2. Right-click the access right that you want to edit, and select Add / remove lock.
   The Edit access right wizard is opened.
3. Select Edit access right selections.
4. Edit the lock selections of the access right.
   • — Click the Arrows right button to move all items to the selection list.
   • — Click the Arrow right button to move the selected item(s) to the selection list.
   • — Click the Arrow left button to remove the selected item(s) from the selection list.
   • — Click the Arrows left button to remove all items from the selection list.
5. Select Next.
6. If you are:

   • Deploying new locks, the options are:

     • Leave locks in planning state — Select Leave locks in planning state if you want to leave the locks in the planning state, and continue planning the locking system without, for example, programming any physical locks.

     • Order programming task — Select Order programming task if you know that the lock definitions are final, but you want to program the lock later.

       For more information, see Ordering Locks.

     • Order and program locks — Select Order and program locks:

       • If you know that the lock definitions are final, and you want to program the lock at once.
       • For locks that have not yet been installed on the premises.

       For more information, see Programming New Locks in the Lock View.

   • Reprogramming deployed locks, the options are:

     • Leave locks in planning state — Select Leave locks in planning state if you want to leave the locks in the planning state, and program the locks later.

     • Order and send tasks to keys — Select Order and send tasks to keys if want to create the programming tasks and transfer them to keys, and let the keys carry out the programming, when the key is used on the lock.

     • Order and program locks — Select Order and program locks if you want to create the programming task, and execute it at once for a single lock at hand.

7. Select Next.
8. Optional: If you selected Order and send tasks to keys, select whether to send the tasks to all keys or to selected keys only.
9. Optional: Select Next.
10. A summary screen is shown.
11. Follow the wizard to end the procedure.