Door Module N102
Door Module is a bus device located in the vicinity of a door, and it controls devices installed on the door, such as a lock cylinder, a key reader, an RFID reader, an electric lock, an electric strike plate, a magnet lock, and so on.
Door Module is hosted by Net Bridge; it does not operate independently. Door Module has several different use cases, and it can be used both as unprogrammed or programmed.
- Connecting lock cylinders for remote management.
- Connecting a calendar-controlled electric lock.
- Connecting a key reader to control an electric lock.
- Connecting an RFID reader to control an electric lock.
- Connecting a key reader to control an alarm system.
- Connecting an RFID reader to control an alarm system.
- Connecting readers to control an electric lock by a key and PIN code combination.
- Connecting a code-controlled electric lock.
Door Module is meant to be installed to a dry indoor environment. If you must install Door Module outdoors, for example, to control a gate, ensure that it is not exposed to rain.
Door Module is depicted in the figure below.