Network Module LED Indicators

Table 1. Network Module LED Indicators
LED Description
ST1

Status 1

  • Green light is on: the device settings are in order and the connection to the server has been successfully tested.
  • Orange light is on: the network module is attempting to connect or an active connection to the server has been established. Data is being updated to the network module, or the network module is polling the server for programming tasks.
  • Red light is on: the network module cannot connect to the server, or the settings are missing.
ST2

Status 2

  • Keeps blinking if a master token is not connected to the network module.
  • Green light is on: a master token is connected.
L0, L1, L2, L3, L4, L5

The lock LEDs (1-6)

  • Green light is on: a lock is connected to the network module.
  • Color sequence while reading the log of a lock: red → orange → blinking green.
  • Color sequence during the programming of a lock: red → orange → green.
K1, K2, K3, K4

Control relay LEDs

  • Green light is on: the controlling of the relay is active.