This section describes how to add access rights to iLOQ Locking System.
Create the access rights according to the locking plan devised together with the end
customer.
Note:
Create the access right groups one by one. See Access Rights.
If you also want to create lock-specific, individual access rights, create them
as a batch operation after you have added the locks, but not yet programmed
them. See Adding Individual Access Rights to Locks.
Note:
Mandatory fields are marked with an asterisk (*).
Proceed as follows.
-
Select .
-
Select Add access right.
The Adding of access right wizard is opened.
-
Select Add access right.
-
Name the access right.
Tip:
Typically, the first access right is for the entire premises, and is
called, for example, "Master access".
-
Enter a description for the access right. For example, "Access to all
premises".
-
Select whether a conditional access is used for the access right by checking or
unchecking the Conditional access active check box.
For more information on conditional access rights, see Access Rights.
-
Enter a more detailed description for the conditional access right.
-
Select whether the access right will, by default, be added to new locks by
checking or unchecking the Add to new locks by default
check box.
Tip:
If you are creating a system-wide master key access right supposed to be
in all locks, choose Yes.
In this way, you will never forget to add the access right to new
locks.
-
Select visibility for the access right.
For more information on access right visibility, see Access Rights.
-
Select Next.
-
Select whether the access right will be versional.
For more information on versional access rights, see Access Rights.
-
Select Next.
-
A summary screen is shown.
-
Select Ready.
-
Select Close.
